EMC QLogic Installation Guide download pdf (Page 52)

EMC Fibre Channel and iSCSI with QLogic Host Bus Adapters in the Windows Environment

Installation and Configuration

using the copy command. As with DOS, the copy command can use

an asterisk to grab multiple files, (i.e.,

Copy *.* fs0:).

Once the files are copied to the RAMDISK, you may proceed to install

Windows.

Note: If the server is rebooted at any time, this procedure will need to be

repeated as the RAMDISK is deleted during a reboot.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 149 150

Windows Environment 1
Contents 3
Chapter 3 Troubleshooting 5
Courier italic 15
Installation and 17
Configuration 17
How this guide works 18
Verify Array/LUN 19
Visibility for Boot 19
Installing the HBA 20
STOP: 0X0000007B 21
HBA edge connecters 23
PCI Express slots 24
PCI Express slots aligned 24
QLogic banner 29
Main Fast!UTIL options window 30
Configuration Settings window 30
Adapter Settings window 31
Enter 34
Warning dialog 35
Fast!UTIL Options window 36
Firmware boot manager menu 38
refer to memory ramdisks 39
QLogic directory 41
EFIutil.efi 41
QLogic efiutil all upgrade 43
QLogic Fibre Channel drivers 45
Driver handle numbers 46
-s 5f 62 46
Edit adapter settings 47
Connection option 48
Figure 32 Options set 50
RAMDISK 51
Windows 52
HBA selection screen 57
Windows setup screen 58
Base article Q240672.) 59
Existing partitions 59
Windows Boot Manager 62
Windows Setup screen 62
Windows Install screen 63
Loading driver screen 66
Browse for Folder screen 67
A as shown in Figure 47 67
Install Windows screen 70
Pre-installation guidelines 71
Driver installation/upgrade 72
SANsurfer driver selection 74
Post-installation procedures 78
SANsurfer HBA install wizard 79
Show SAN 82
SANsurfer icon 83
Connect to the host 84
ServerManager: 85
<sp_IP> 88
<storagegroupname> 88
Miscellaneous 91
Planning and 91
Procedures 91
Download Firmware dialog box 97
F1 to enter the server BIOS 112
Enter. This boot device 112
Blade server restrictions 113
Driver revision 114
Where to find the driver 115
Windows 2003 STORPort updates 116
STORPort drivers 117
A:\, for 120
QLogic advanced utilities 123
Utilities tabbed page 125
EMC CLARiiON storage arrays 127
Set the HBA FC-AL loop ID 130
Reconfigure the HBA jumper 133
Troubleshooting 135
Volume sizes 136
Host after the rebooted 141
Known issues 142
Problems and solutions 143
Problem 4 144
Problem 5 144
Problem 6 144
Problem 7 145
Problem 8 145
Problem 9 145
Third-Party Software 147
SANsurfer version history 148

Comments to this Manuals

No comments

EMC QLogic Installation Guide Page 52

Comments to this Manuals